Battery Charger

“All In One” CBI series: Uninterruptible Power Supply with DC output.
Thanks to “All In One” CBI series of DC-UPS, it will be possible to
optimize the power management of your system with one single,
extremely compact and cost-effective device, connected directly to the
mains. The available power is automatically distributed between load
and battery giving priority to the load. Battery can supply the load even
with mains so the output power to the load can be twice the nominal
power if it is required (Power Boost). When mains failure occurs, the
load continues to be supplied by the battery in backup mode. It is also
possible to switch on the device with no mains directly from battery. The “Battery Care” algorithm performs rapid and
automatic charging, battery charge optimization during time, flat batteries recovery and real time diagnosis during
installation and operation. Temperature compensation is possible to connect the temperature sensor probe. The real time
auto-diagnostic system monitors battery faults such as sulfated battery, shorted cells, accidental reverse polarity
connection or disconnection of the battery. Every fault is signaled by a blink code of Diagnosis Led or via Modbus (only
in some models) in order to be easily detected and removed during the installation and after sales. The continuous
monitoring of battery efficiency reduces risk of battery damage and allows a safe operation in permanent connection.
Predefined curves can be selected by jumpers or DIP switch to optimize the charge of different battery types: Open Lead
Acid, AGM and Gel Lead Acid; Ni-Cd are rechargeable in the same device. Charging curves can be customized via
Modbus (only in some models). Output dry contacts are used to signal both backup and fault conditions. A rugged casing
with bracket for DIN rail mounting provides IP20 protection degree.